ero610 ? ceramic ac capacitors ? class x1, 440v ac/class y2, 250vac typical applications construction technical data for worldwide use as electromagnetic interference suppressor in all x1 and y2 applications. disc capacitors with epoxy coating. epoxy dipped, insulating, ? ame retarding according to ul 94v-0. x1 y2 rated voltage u r 440 vac, 50 hz 250 vac, 50 hz (iec 60384-14.2) capacitance range 1000-12000 pf capacitance tolerance 20% temperature range (-40 to +125)c climatic category iec 40/125/21 climatic category iec 40/125/21 climatic category approvals vde, ul, csa dissipation factor tan 25 ? 10 -3 test voltage between component test: terminals 5 mm: 2200 vac, 50 hz, 2 s 7.5 mm: 2500 vac, 50 hz, 2 s as repeated test admissible only once with 2000 vac, 50 hz, 2 s random sampling test (destructive test): 1500 vac, 50 hz, 60 s dielectric strength of 2000 vac, 50 hz,60 s (destructive test) body insulation insulation resistance 6 ? 10 9 ? taping and special lead on request con? gurations p statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applic ations, but are not intended to constitute and we specifically disclaim any warranty concerning suitabi lity for a specific customer application or use. this information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice in ferred from this inform ation or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the ad vice given or results obtained.
2 article table approvals/reference documents certi? cation body speci? cation approval reference vde en 132400 40001990 ul ul 1414 (u r = 250 vac) e73869 csa c 22.2 no. 1-m90 (u r =250 vac) 216038 (cul recognition) ordering information article code 1st block 2nd block see article table see separate brochure: pos. 13 capacitance tolerance code: ceramic disc, emi and safety capacitors, m = 20% standard general information page 5 see article table and page 19 in the kemet film capacitors 2003 catalogue. for options, see ceramic disc, emi and safety capacitors, general infor mation, page 5. packing the box dimensions for bulk packaging are 245 x 145 x 80 mm. quantity/package as per article table. reels with taped capacitors are packed 10 in a box with dimension 370 x 370 x 560 mm. quantity/reel according to article table. the standard quantity/reel is for 360 mm reel. if 500 mm reel is required, it must be speci? ed when ordering and the quantity is 2 x the given quantity. marking 3.3 nf to 12 nf 1 nf to 2.5 nf all approval marks are also shown on the label. data sheet ero610 speci? cations subject to change without notice ? kemet 2011 ero610 quantity per package capaci- tance d x s max p1* d0.05* v0.5* article code ceramic pf (mm) (mm) (mm) (mm) 1 st block dielectric 1000 6.5 x 4.5 5 0.6 1.4 ero610rj4100m k 4000 1500 8.0 x 4.5 5 0.6 1.4 ero610rj4150m k 4000 1800 8.0 x 4.5 5 0.6 1.4 ero610rj4180m k 4000 2200 9.0 x 4.5 5 0.6 1.4 ERO610RJ4220M k 4000 2500 9.0 x 4.5 5 0.6 1.4 ero610rj4250m k 4000 3300 10.0 x 4.5 7.5 0.6 1.4 ero610rk4330m k 4000 4700 12.0 x 4.5 7.5 0.6 1.4 ero610rk4470m k 4000 5000 12.0 x 4.5 7.5 0.6 1.4 ero610rk4500m k 4000 6800 17.0 x 4.5 7.5 0.6 1.6 ero610rk4680m k 4000 8200 17.0 x 4.5 7.5 0.6 1.6 ero610rk4820m k 4000 10000 21.0 x 4.5 7.5 0.6 1.6 ero610rk5100m k 4000 12000 21.0 x 4.5 7.5 0.6 1.6 ero610rk5120m k 4000 * standard lead con? guration, other lead spacing and diameter available on request. 440~x1 ero 2n2 m 250~y2 ero 4n7 m iec 384-14/2 440 250 250~ x1 y2 c ? us
|
